Centek Centralizer | Case Studies

Continent Product Case Study Type

Case StudyS2 CENTRALIZERS HELP OPERATOR REACH TD DESPITE HARSH WELLBORE CONDITIONS, SAVING UP TO $250,000

Case StudyCENTEK S2 PERFORMS AFTER FAILURE WITH ZINC ALLOY SOLID BODY CENTRALIZERS FOR END USER

Case StudyS2 CENTRALIZERS AND 00SO STOP COLLARS ARE SUCCESSFULLY RE-RUN AFTER CASING IS PULLED

Case StudyS2 CENTRALIZERS ARE PULLED OUT OF HOLE AND SHOW NO DAMAGE OR DEFORMATION

Case StudyUnique new S2 Hinged centralizer provides solution for drill ship in eastern mediterranean

Case StudyThe robust and durable Centek S2 proves its ability to operate successfully in ERD wells

Case StudyUROS-CT proves to be best solution for tight tolerances in the North Sea

Case StudyCentek centralizers are re-run in Rajastan, India

Case StudyTUR centralizers pulled through a FMC sub-mudline receptacle with no issues

Case StudyCentek UROS-CT preferred choice for deepwater wells

Case StudyCustomer makes move to Centek Centralizers over solids

Case StudyCentek UROS centralizers improve stand-off in washed out hole sections of HPHT well

Case StudySuccess on second trip in hole!

Case StudyCentek centralizers save 18 hours rig time in Egypt

Case StudyCentek centralizers undamaged after 800ft fall

Case StudyCentek S2 will get you to TD even with low hook weights

Case StudyUsing Centek S2 achieved an average reduction in liner running time of 23%*

Case StudyCorrect spacing program leads to reduction in drag for Conoco Phillips

Case StudyCentek UROS undamaged after more than 12 hours of rotation in Norwegian well

Case StudyNew centralizer designed, tested and brought to market in 8 weeks

Case StudyRugged Centek Centralizers enable casing rotation during cementing operations

Case StudyOperators selects UROS-CT as an alternative to centralizer sub for deepwater

Case StudyCentek delivers low cost and flexibility in an ultra deepwater well

Case StudyUROS-CT is preferred solution to centralizer sub in shallow water, offshore well in Mexico

Case StudyUROS-CT is the solution for close tolerance offshore well in Senegal

Case StudySuccessful liner running operation and reciprocation achieved on bottom with Centek S2

Case StudyCentek S2 centralizers help operator achieve cementing success

Case StudyCentek S2s are rotated at TD in deep lateral in the Niobrara formation

Case StudyIncreasing the number of centralizers per joint can dramatically improve rotation at TD

Case StudyCentek S2 reduces torque and drag and gets string to TD in spite of high build rates

Case StudyCentek S2 centralizers halve the time to get to bottom

Case StudyThe Centek TUR centralizer passes through a restricted ID, returns to zero start and running forces and back to its original design

Case StudyUROS gets to bottom even in high dogleg severity (DLS), under-reamed well

Case StudyOperator needed solution for tight tolerance, shallow offshore well